For 3/8" or 1/2" (10 or 12 mm) Glass

With or Without Locks

2-3/4" (70 mm) Pivot Setback
Use Monolithic Tempered Glass

CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate's glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.

CRL Brushed Stainless Top Door Patch Fitting With 1NT303 Insert

Other Products/Finishes:

CATALOGUE NUMBER	DESCRIPTION	COLOUR
PH20AA	CRL Satin Anodized Top Door Patch Fitting With 1NT303 Insert
PH20ABR	CRL Brass Top Door Patch Fitting with 1NT303 Insert
PH20ABS	CRL Brushed Stainless Top Door Patch Fitting With 1NT303 Insert
PH20ADU	CRL Dark Bronze Top Door Patch Fitting with 1NT303 Insert
PH20AMBL	CRL Matte Black Top Door Patch Fitting With 1NT303 Insert
PH20APS	CRL Polished Stainless Top Door Patch Fitting with 1NT303 Insert
PH20ASB	CRL Satin Brass Top Door Patch Fitting with 1NT303 Insert

More Details:

Catalogue Number:

PH20ABS

Also Available in These Catalogues:

AH18 Architectural Hardware Catalogue 2018, PAGE 206Z

CRL83R Door and Window Replacement, PAGE 339W

CRL63A Architectural Hardware Master, PAGE 370H

HR18 Architectural Balustrade Systems 2018, PAGE 512B

CRL63R Architectural Balustrade Systems, PAGE 513R

CRL93A Architectural Hardware, PAGE CH119

HS12 Hospitality and Food Service Hardware, PAGE P638

Colour:

Brushed Stainless

Ship Via:

Can Ship UPS

Shipping Weight:

1 lb (454g)

Minimum Order:

1 Each

Additional Product Information:

The following guidelines are to be used when making a door using this hardware:

Maximum Height: 102" (2.59 m)
Maximum Weight: 194 lbs. (88 kg)
Maximum Width: 42" (1.07 m)

If the door exceeds any of these limitations, full door rails should be used.

GLASS FABRICATION REQUIRED:
One 3/4" (19 mm) Diameter
Hole and Corner Notch

COMES WITH:
Template and Instructions

Do Not Use With:
PH42L, PH42R, PH43L or PH43R
Transom Patch Fittings. They Require
European Door Patch Fitting PH21A

Important Notes:

These fittings are not for use with Laminated Glass. The following guidelines are to be used when making a 1/2" glass door using this hardware: Maximum Height: 102" (2.59 m) Maximum Height: 176 Lbs. (80 kg) Maximum Width: 42" (1.09 m) If the door exceeds any of these limitations, full door rails should be used.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 3/8" or 1/2" (10 or 12 mm) Glass

With or Without Locks

2-3/4" (70 mm) Pivot Setback Use Monolithic Tempered Glass

CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate's glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.

2-3/4" (70 mm) Pivot Setback
Use Monolithic Tempered Glass