L25S10D - CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern
C.R.LaurenceC.R. Laurence of Australia Pty Ltd.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalogue Number: L25S10D


  • For 1-1/16" (25.52 mm) Laminated Tempered
    Glass (12 x 1.52 x 12 mm)
  • Drilled and Counter Bored 11-13/16"
    (300 mm) Center-to-Center, or We Will
    Custom Drill to Your Specifications

  • Typically Used as the Base Channel for
    Glass Railing Systems or Windscreens

  • Works with LTL10X TAPER-LOC® Taper Sets
  • Engineering Reports Available
  • CRL Recommends Consulting with the Glass
    Fabricator Prior to Wet Setting
    Laminated Tempered Glass
  • CRL Glass Railing Systems Meets
    NBC Load Requirements When Installed
    in Accordance to ICC-3842

    		•

    The CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.


    CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern


    		 


    Other Products/Finishes:

    CATALOGUE NUMBER DESCRIPTION
    L25S10 CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Undrilled
    L25S10D CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern
    L25S10D6 CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes Pattern "D"
    L25S10F CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 9/16" Fascia Holes Patten "F"
    L25S10F6 CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 9/16" Fascia Holes Patten "F"

    Catalogue Number:L25S10D
    Also Available in These Catalogues:
    CRL63R Architectural Balustrade Systems, PAGE 148R
    HR18 Architectural Balustrade Systems 2018, PAGE 174B
    CRL53R Glass & Glazing Catalogue, PAGE 568G
    CRL63A Architectural Hardware Master, PAGE 594H
    CRL93A Architectural Railings, PAGE HR038
    LP11 Commercial Door Handles Catalogue, PAGE L238
    Stock Length:118-1/8" (3 m)
    Hole Size:13/16" (20.6 mm)
    Counter Bore x Depth
    Holes Drilled C.T.C. :    		1-1/4" (31.7 mm) x 1/2" (12.7 mm)
    11-13/16" (300 mm)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:102.83 lb (46.64kg)
    Minimum Order:1 Each

    GLASS SPECIFICATIONS:
    For use with 1-1/16" (25.52 mm) Laminated Tempered Glass 1/2" x .060 x 1/2" (12 mm x 1.52 mm x 12 mm)
    Thickness Range: 0.960" to 1.060" (24.40 to 26.92 mm) Will work with ASTM 1" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16" (27 mm) glass

    CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.
    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.

    TLEX1
    CRL TAPER-LOC® Extraction Tool

    1973
    CRL 1973 Ammoniated Aerosol Glass Cleaner

    TLK12
    CRL TAPER-LOC® Installation/Removal Tool Kit for Glass Railing and Windscreen Systems

    LTL10X
    CRL TAPER-LOC® Taper Sets for 21.52 and 25.52 mm Laminated Tempered Glass