Ready to Use for Face Glazing Wood, Metal or Aluminum Window Frames

Easy Application From Cartridge

Must Be Painted

CRL Dap® Latex Glazing is an easy-working compound for back-bedding and face-glazing window sash. It adheres well to wood, aluminum, steel and galvanized sash for a weathertight seal. Its smooth, consistent texture can be applied directly from the cartridge, requires no kneading, and resists shrinking and cracking. The 10.1 fl. oz. (300 ml) tube features a unique, rectangular shaped nozzle for uniform beads. Excess glazing can be removed with soap and water before it sets. Dries to touch in two hours. Typical dry time required before painting is three to seven days depending on temperature and relative humidity. The white color compound can be painted with latex paint after three days. Oil-based paint may be applied after one week. Surfaces should be clean, dry, and free of frost. When re-glazing, remove all old putty and bedding. Smooth glazing to an angle that sheets water.

CRL White Dap® Latex Window Glazing Compound

Other Products/Finishes:

CATALOGUE NUMBER	DESCRIPTION	COLOUR
DAP13TU	CRL White Dap® Latex Window Glazing Compound

More Details:

Catalogue Number:

DAP13TU

Also Available in These Catalogues:

CRL83R Door and Window Replacement, PAGE 873W

CRL03 Sealants, Adhesives, and Fasteners, PAGE N182

Colour:

White

Size:

10.1 fl. oz. (300 ml)

Ship Via:

Can Ship UPS

Shipping Weight:

1 lb (454g)

Case Qty:

Minimum Order:

1 Each

Additional Product Information:

SPECIFICATIONS:
Coverage: 33 linear feet (10 m) at 3/8" x 1/4" (9.5 x 6 mm) triangular cross section per cartridge. Meets ASTM Spec C-669-95.

LIMITATIONS:
Do not thin glazing compound. Do not apply when air or sash temperatures are below 40ºF (4ºC). Do not use on plastic windowpanes, insulating glass units with an organic seal, any windowpane over 48" (1.22 m) in length, or metal sash with rabbets over 1-1/4" (32 mm) wide. Also not recommended for stained/leaded glass projects.

Important Notes:

LIMITATIONS: Do not thin glazing compound. Do not apply when air or sash temperatures are below 40ºF (4ºC). Do not use on plastic windowpanes, insulating glass units with an organic seal, any windowpane over 48" (1.22 m) in length, or metal sash with rabbets over 1-1/4" (32 mm) wide. Also not recommended for stained/leaded glass projects.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.