For 1/2" (12 mm) Monolithic Tempered Glass

Typically Used as the Base Channel for
Glass Railing Systems or Windscreens
Drilled and Counter Bored 12" (305 mm)
Center-to-Center, or We Will Custom Drill
to Your Specifications

Custom Cutting and Mitering Service
Test Reports Available
Use Monolithic Tempered Glass
CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3269

The CRL GRS™ B5S Series Standard Square Base Shoe is used as the base channel for glass railing systems. It can be clad in six choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered and tested a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners.

CRL Mill Aluminum 120" GRS™ B5S Series Standard Square Base Shoe Drilled with 9/16" Hole Size

Other Products/Finishes:

CATALOGUE NUMBER	DESCRIPTION
B5S10	CRL Mill Aluminum 120" B5S Series Standard Square Base Shoe Extrusion Only Without Holes
B5S10C	CRL Mill Aluminum Custom B5S Series Standard Square Base Shoe
B5S10D	CRL Mill Aluminum 120" GRS™ B5S Series Standard Square Base Shoe Drilled with 9/16" Hole Size
B5S10D6	CRL Mill Aluminum 120" B5S Series Standard Square Base Shoe Drilled with 9/16" Hole Size
B5S10F	CRL Mill Aluminum 120" Fascia Mount Square Base Shoe for 1/2" Glass
B5S10F6	CRL Mill Aluminum 120" Fascia Mount Square Base Shoe for 1/2" Glass

More Details:

Catalogue Number:

B5S10D

Also Available in These Catalogues:

CRL63R Architectural Balustrade Systems, PAGE 132R

HR18 Architectural Balustrade Systems 2018, PAGE 144B

CRL53R Glass & Glazing Catalogue, PAGE 569G

CRL63A Architectural Hardware Master, PAGE 595H

CRL93A Architectural Railings, PAGE HR018

Stock Length:

120" (3.05 m)

Hole Size:

9/16" (14.3 mm)

Counter Bore x Depth
Holes Drilled C.T.C. :

7/8" (22 mm) x 1/2" (12.7 mm)
12" (305 mm)

Ship Via:

No UPS - Common Carrier Only

Shipping Weight:

84 lb (38.1kg)

Minimum Order:

1 Each

Additional Product Information:

SPECIFICATIONS:
Material: 6063 Aluminum Alloy T52 Temper
Typical Use: Heavy-Duty Square Base Shoe used with 1/2" (12 mm) glass as the base channel for glass railing systems. Also available counterbored and drilled.

Important Notes:

CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 1/2" (12 mm) Monolithic Tempered Glass

Typically Used as the Base Channel for Glass Railing Systems or Windscreens Drilled and Counter Bored 12" (305 mm) Center-to-Center, or We Will Custom Drill to Your Specifications

Custom Cutting and Mitering Service Test Reports Available Use Monolithic Tempered Glass CRL Glass Railing Systems Meets NBC Load Requirements When Installed in Accordance to ICC-3269

Typically Used as the Base Channel for
Glass Railing Systems or Windscreens
Drilled and Counter Bored 12" (305 mm)
Center-to-Center, or We Will Custom Drill
to Your Specifications

Custom Cutting and Mitering Service
Test Reports Available
Use Monolithic Tempered Glass
CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3269