Z610CH - CRL Chrome Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass
C.R.LaurenceC.R. Laurence of Australia Pty Ltd.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalogue Number: Z610CH
Finish: CHROME


  • For 3/8" (10 mm) Glass
  • Replacement Gaskets are Available by Ordering Cat. No. Z38SG
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
  • Custom Painted Finishes Available Upon Request

  • This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 3/8" (10 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.



    CRL Chrome Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass


     


    Other Products/Finishes:

    CATALOGUE NUMBER DESCRIPTION COLOUR
    Z610BN CRL Brushed Nickel Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass
    Z610BR CRL Brass Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass
    Z610CH CRL Chrome Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass
    Z610GP CRL Gold Plated Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass
    Z610SC CRL Satin Chrome Z-Series Square Type Radius Base Zinc Clamp for 3/8" Glass

    Catalogue Number:Z610CH
    Also Available in These Catalogues:
    CRL53R Glass & Glazing Catalogue, PAGE 286G
    HR18 Architectural Balustrade Systems 2018, PAGE 308B
    SC18 Standoff and Clamp Hardware, PAGE 48SC
    CRL63A Architectural Hardware Master, PAGE 615H
    GG2014A European Glass & Glazing, PAGE E082
    CRL93A Architectural Railings, PAGE HR104
    Colour:Chrome
    Width:2-1/8" (54 mm)
    Height:2-9/32" (58.1 mm)
    Ship Via:Can Ship UPS
    Shipping Weight:8 oz (227g)
    Minimum Order:1 Each

    For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

    NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

    SPECIFICATIONS: Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm).
    Base Design: Radius.
    For Use With: 2" (51 mm) Diameter Round Tubing only.
    Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
    Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
    Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet.

    For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.