For 1/4" and 5/16" (6 and 8 mm) Glass
Use Monolithic Tempered Glass

For Use on Mezzanines, Partitions, Railings and Windbreaks
Use Monolithic Tempered Glass

Steel Pin Available for Additional Glass Support
Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
Custom Painted Finishes Available Upon Request

This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 1/4" to 5/16" (6 to 8 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

CRL Brass Z-Series Square Type Radius Base Zinc Clamp for 1/4" and 5/16" Glass

Other Products/Finishes:

CATALOGUE NUMBER	DESCRIPTION	COLOUR
Z606BN	CRL Brushed Nickel Z-Series Square Type Radius Base Zinc Clamp for 1/4" and 5/16" Glass
Z606BR	CRL Brass Z-Series Square Type Radius Base Zinc Clamp for 1/4" and 5/16" Glass
Z606CH	CRL Chrome Z-Series Square Type Radius Base Zinc Clamp for 1/4" and 5/16" Glass
Z606SC	CRL Satin Chrome Z-Series Square Type Radius Base Zinc Clamp for 1/4" and 5/16" Glass
Z606W	CRL White Z-Series Square Type Radius Base Zinc Clamp for 1/4" and 5/16" Glass

More Details:

Catalogue Number:

Z606BR

Also Available in These Catalogues:

CRL63R Architectural Balustrade Systems, PAGE 272R

CRL53R Glass & Glazing Catalogue, PAGE 286G

HR18 Architectural Balustrade Systems 2018, PAGE 308B

SC18 Standoff and Clamp Hardware, PAGE 48SC

CRL63A Architectural Hardware Master, PAGE 615H

CRL93A Architectural Railings, PAGE HR104

Colour:

Brass

Width:

2-1/8" (54 mm)

Height:

2-1/4" (56.9 mm)

Ship Via:

Can Ship UPS

Shipping Weight:

8 oz (227g)

Minimum Order:

1 Each

Additional Product Information:

For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS: Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm)
Base Design: Radius
For Use With: 2" (51 mm) Diameter Round Tubing Only
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet

Important Notes:

For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 1/4" and 5/16" (6 and 8 mm) Glass Use Monolithic Tempered Glass

For Use on Mezzanines, Partitions, Railings and Windbreaks Use Monolithic Tempered Glass

Steel Pin Available for Additional Glass Support Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)Custom Painted Finishes Available Upon Request

This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 1/4" to 5/16" (6 to 8 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For 1/4" and 5/16" (6 and 8 mm) Glass
Use Monolithic Tempered Glass

For Use on Mezzanines, Partitions, Railings and Windbreaks
Use Monolithic Tempered Glass

Steel Pin Available for Additional Glass Support
Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
Custom Painted Finishes Available Upon Request