PH41LBR - CRL Polished Brass Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
C.R.LaurenceC.R. Laurence of Australia Pty Ltd.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalogue Number: PH41LBR
Finish: POLISHED BRASS


  • Works with Both 2-3/4" and 2-9/16" (70 and 65 mm) Pivot Setback Door Patch Fittings

  • For 3/8" or 1/2" (10 or 12 mm) Glass

  • Left and Right Handed
  • Use Monolithic Tempered Glass

  • The CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A or PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.



    CRL Polished Brass Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert


     


    Other Products/Finishes:

    CATALOGUE NUMBER DESCRIPTION COLOUR
    PH41LA CRL Satin Anodized Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
    PH41LBR CRL Polished Brass Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
    PH41LBS CRL Brushed Stainless Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
    PH41LDU CRL Dark Bronze Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
    PH41LMBL CRL Matte Black Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
    PH41LPS CRL Polished Stainless Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert

    Catalogue Number:PH41LBR
    Also Available in These Catalogues:
    AH18 Architectural Hardware Catalogue 2018, PAGE 213Z
    CRL63A Architectural Hardware Master, PAGE 375H
    CRL93A Architectural Hardware, PAGE CH125
    Colour:Polished Brass
    Ship Via:Can Ship UPS
    Shipping Weight:2 lb (907g)
    Minimum Order:1 Each

    If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.

    GLASS FABRICATION REQUIRED:
    Five 3/4" (19 mm) Diameter
    Holes and Two Corner Notches

    COMES WITH:
    Template and Instructions

    These fittings are not for use with Laminated Glass.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.